Your Cart

BOAT HEAVY COMPOUND (16OZ)

NZD $56.99

10 weekly payments of $5.70 learn more

Marine and Boat Heavy Compound removes deep scratches and swirls from gelcoat and fiberglass with an advanced high grade abrasive technology to cut and refine gloss and shine on watercraft.

or 4 fortnightly payments of NZD $14.25 with Afterpay More info

or 6 weekly interest-free payments from NZD $9.49 with Laybuy what's this?

SKU: #MBW11116 Categories: ,

Description

Marine and Boat Heavy Compound removes deep scratches and swirls from gelcoat and fiberglass with an advanced high grade abrasive technology to cut and refine gloss and shine on watercraft.
Use This To:

Remove deep defects and scratches
Polish gel coat, fiberglass, and more
Prepare boat for final polish
Advanced abrasive technology
Designed specifically for boats and watercraft
Versatile For All Watercrafts Parts

Boat Heavy Compound cuts away defects, scratches, and contamination from painted finishes, aluminum, fiberglass, gel coat, polished metal, and plastic parts from any watercraft. Cut away faded gel coat and oxidized paint from sun-beaten parts above the waterline to restore luster and shine. Cut back crusty barnacles and salt buildup from below the waterline for a smooth finish with improved performance through the water. Erase heavy water spots and oxidation from metal rails and trim pieces for a bright and true reflection.
Prepare Surfaces For Final Polish And Deep, Lustrous Shine

Polishing with a machine is the only way to permanently repair surface defects like swirls, scratches, and oxidation without resorting to drastic measures like repainting and refinishing a surface. Heavier levels of contamination, oxidation, and damage like swirls and scratches require heavier abrasives and compounds to cut away the deeper defects. Boat Heavy Compound knocks down the heaviest damage and defects to set up the rest of the polishing process for success.

How to use it:

Dual Action Polisher

Shake well and apply 4-5 drops to desired pad.
Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
Turn on machine on paint to speed setting 1 to spread product.
Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
Follow with light pressure to finish.
Remove residue with a clean microfiber towel.
Please Note: Always try a test spot before use.

Rotary Polisher

Shake well and apply 4-5 drops to desired pad.
Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section.
Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product.
Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
For final pass adjust speed setting to between 1200-1800 rpms.
Work until optical clarity is achieved.
Remove residue with clean microfiber cloth.

SPR PARTS – STREET PERFORMANCE RACE PARTS