V36 Optical Grade Cutting Polish is the great all-around cutting-polish that eliminates light to moderate paint defects and imperfections from all paint types, then finishes like a fine polish.
Use This Polish To:
Removes 2000-2500 grit sanding scratches
Tackle light to moderate swirls and scratches
Perform a one-step polish for a superior luster
Restore your headlights for safest night driving
Finish with clarity and precision for the brightest shine
Flexible Cutting And Finishing Power For Moderate Paint Defects
V36 is formulated for fast cutting with optical grade diminishing abrasives that restore both old paint finishes and freshly-painted panels. The advanced polish cuts through light to moderate paint defects, swirls, scratches and oxidation, then finishes with superior luster fit for final polish results on most paints. V36 contains no fillers or oils, so the results you see are the results you get!
Advanced Abrasives For Modern Paint Technology
V36 is the preferred finishing polish for repairing optical plastic after wet-sanding and compounding faded and hazy headlights and taillights. The water-based formula is blended with advanced lubricants for extended work time and a minimal dusting profile. Use Chemical Guys V36 Optical Grade Cutting Polish to remove light to moderate defects, swirls, and scratches from any paint finish.
How To Use:
Directions: Work on cool surface. Shake well. Always work 2’ x 2’ section at a time.
DA Application: Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Spread on speed setting 1. Set DA machine to speed setting 5-6. Using moderate pressure, work area in 2-3 passes until compound becomes clear. Follow with light pressure to finish. Remove residue with clean microfiber cloth. Follow with V38 Optical Grade Hybrid Compound for perfect clarity.
Rotary Application: Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Set machine to between 1000-1500 rpms to spread product. Work in 2’ x 2’ section at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear. For final pass adjust speed setting to between 1200-1800 rpms. Work until optical clarity is achieved. Remove residue with clean microfiber cloth. Follow with V38 Optical Grade Hybrid Compound for perfect clarity.